Máy đo nhiệt độ và độ ẩm Nakata NM-20-TH

Máy đo nhiệt độ và độ ẩm Nakata NM-20-TH

Giá: 968,000 (ĐÃ CÓ VAT)

Thông tin nhanh về sản phẩm

  • Tên sản phẩm: Máy đo nhiệt độ và độ ẩm Nakata NM-20-TH
  • Mã sản phẩm: Nakata NM-20-TH
  • Hãng sản xuất: Nakata
  • Xuất xứ: Japan
  • Khoảng đo ẩm: 0%~100%
  • Khoảng đo nhiệt độ trong phòng: 20o C ~ 60o C
  • Khoảng đo nhiệt độ ngoài phòng: 20o C ~ 60o C
  • Độ chính xác độ ẩm: +/- 5% (40%~80%)
  • Độ chính xác nhiệt độ: +/- 1o C
  • Kích thước: 150 x 150 x 30mm
  • Trọng lượng: 400gram
  • Bảo hành:  1 năm
  • Giao hàng: Miễn phí TPHCM
  • Tham khảo thêm:  Thông tin, Thông số kỹ thuật bên dưới hoặc www.namlong.vn

Sản phẩm cùng loại

NAKATA®          THERMO-HYGROMETER

Model: NM-20TH

 
USER INSTRUCTION
 
  • Temperature sensing element: bi-metal spiral spring
  • Humidity sensing element: specially treated hair
  • Body: stainless steel SUS304
  • Covering face: glass 
  1. Specification
 
Model Parameter Scale Measuring Range Accuracy Scaling
NM-20TH Temperature -20oC ~ +60oC -15oC ~ +55oC ± 1oC 1oC
Humidity 0% ~100% 20%~100% ±5% 1%
 
 2. Usage 
  • The meter can be either  placing  on  flat surface or hang against the wall.
  • The meter should be place at place where air is moving freely
  • Avoiding direct sunshine striking the meter
  • In case there is so much dirt particle in the environment, the meter should be installed in a net box to prevent dirt covering the sensor.
  • No  battery  or  any  other  powers  source  are
required.
  • The meter can be calibrated by caliberating screw locating in rear of the meter (one for humidity and another for temperature). 
  1. Problems and counter-measurement 
Parameter Phenomenon Counter-measurement
Humidity After a long use in environment with stable dry humidity, the sensitivity of the sensor can be effected inertial. Covering the meter by wet cloth for few hours until the needle point at right end position. Using screw driver to adjust the needle at 100% position.
After    a    long   use   in dusty environment, needle can be block. Trying to clean the spring & hair by mild air blowing. The placing the meter in net box.
Temperature After  a  long  use,  the  eter  may face similar causes as the above. In order to calibrate, placing a Hg thermometer besides and adjusts temperature needle pointing at the same temperature as with the Hg thermometer reading.
 
 
Máy đo nhiệt độ và độ ẩm Nakata NM-20-TH
Nhiệt ẩm kế kiểu cơ đặt hoặc treo trong phòng
Đồng hồ nhiệt ẩm kiểu cơ, vỏ thép không rỉ, độ chính xác cao, tính thẩm mỹ cao
  • Tên sản phẩm: Máy đo nhiệt độ và độ ẩm Nakata NM-20-TH
  • Mã sản phẩm: Nakata NM-20-TH
  • Hãng sản xuất: Nakata
  • Xuất xứ: Japan
  • Khoảng đo ẩm: 0%~100%
  • Khoảng đo nhiệt độ trong phòng: 20o C ~ 60o C
  • Khoảng đo nhiệt độ ngoài phòng: 20o C ~ 60o C
  • Độ chính xác độ ẩm: +/- 5% (40%~80%)
  • Độ chính xác nhiệt độ: +/- 1o C
  • Kích thước: 150 x 150 x 30mm
  • Trọng lượng: 400gram
  1. Catalogue máy đo khoảng cách Leica Disto X310
  2. Hướng dẫn sử dụng máy đo khoảng cách Leica Disto X310

Sản phẩm cùng nhóm

Hỗ trợ mua hàng Hỗ trợ mua hàng
(028) 3995 5880 - (028) 3997 1540 - (028) 3997 3174
Hỗ trợ Viber/ZaloViber / Zalo:
0938 473 168 - 0918 151 957 - 0932 794 168